Use this science unit conversion reference to choose appropriate SI prefixes, convert common measurements, and check your work with dimensional analysis. It is designed for lab reports, earth-science field notes, physics problems, engineering calculations, and any situation where a unit error could change the meaning of a result.
Overview
Unit conversion is a change in how a measurement is expressed, not a change in the quantity itself. One kilometer and 1,000 meters describe the same distance. The safest way to move between units is to multiply by a conversion factor equal to one, arranged so the original unit cancels.
The International System of Units, or SI, provides the main framework for scientific measurements. Its base units include the meter (m) for length, kilogram (kg) for mass, second (s) for time, kelvin (K) for thermodynamic temperature, ampere (A) for electric current, mole (mol) for amount of substance, and candela (cd) for luminous intensity. Many classroom and laboratory calculations also use derived units such as newtons, joules, pascals, liters, and degrees Celsius.
SI prefixes reference
| Prefix | Symbol | Factor | Example |
|---|---|---|---|
| tera | T | 1012 | 1 TW = 1012 W |
| giga | G | 109 | 1 GHz = 109 Hz |
| mega | M | 106 | 1 MJ = 106 J |
| kilo | k | 103 | 1 km = 1,000 m |
| hecto | h | 102 | 1 hPa = 100 Pa |
| deca | da | 101 | 1 dam = 10 m |
| deci | d | 10-1 | 1 dL = 0.1 L |
| centi | c | 10-2 | 1 cm = 0.01 m |
| milli | m | 10-3 | 1 mm = 0.001 m |
| micro | µ | 10-6 | 1 µm = 0.000001 m |
| nano | n | 10-9 | 1 nm = 10-9 m |
| pico | p | 10-12 | 1 ps = 10-12 s |
Prefix symbols are case-sensitive: k means kilo, while K means kelvin; m means milli when used as a prefix, while M means mega. The SI base unit for mass is the kilogram, so prefixes are normally applied to gram in everyday laboratory notation: 1 mg = 10-6 kg and 1 g = 10-3 kg.
Checklist by scenario
Length, area, and volume
Useful length relationships include 1 km = 1,000 m, 1 m = 100 cm, and 1 m = 1,000 mm. Common non-SI references include 1 inch = 0.0254 m, 1 foot = 0.3048 m, and 1 mile = 1,609.344 m.
For area, square the conversion factor. For example:
1 m2 = (100 cm)2 = 10,000 cm2.
For volume, cube the factor:
1 m3 = (100 cm)3 = 1,000,000 cm3.
A liter is equivalent to 1 dm3, or 0.001 m3. One milliliter equals 1 cm3. If using gallons, identify the convention: one US liquid gallon is 3.785411784 L, while an imperial gallon is different.
Mass and time
For mass, 1 kg = 1,000 g, 1 g = 1,000 mg, and 1 metric tonne = 1,000 kg. Do not confuse mass with weight: mass is measured in kilograms, while weight is a force measured in newtons.
For time, 1 minute = 60 s, 1 hour = 3,600 s, and 1 day = 86,400 s. Time conversions are not based on powers of ten, so write the factor explicitly rather than relying on a metric-prefix shortcut.
Speed, force, and energy
Speed is distance divided by time. To convert kilometers per hour to meters per second, use:
72 km/h × (1,000 m / 1 km) × (1 h / 3,600 s) = 20 m/s.
The newton is the SI unit of force: 1 N = 1 kg·m/s2. The joule is the SI unit of energy: 1 J = 1 N·m, equivalent to 1 kg·m2/s2. A watt measures power, or energy per time: 1 W = 1 J/s. When using calories, state the convention; a thermochemical calorie is 4.184 J.
Pressure, concentration, and temperature
Pressure is force per area. The pascal is defined as 1 Pa = 1 N/m2. Common reference conversions are 1 bar = 100,000 Pa and 1 standard atmosphere = 101,325 Pa. Weather and earth-science data may also use hectopascals; 1 hPa = 100 Pa.
Concentration requires special attention to what is being measured. For mass concentration, 1 mg/L = 1 g/m3. For amount concentration, molarity is expressed as mol/L, although the strictly SI volume unit is m3; 1 mol/L = 1,000 mol/m3.
Temperature conversions are not simple multiplication because the scales have different zero points:
- °C to K: K = °C + 273.15
- K to °C: °C = K − 273.15
- °C to °F: °F = (°C × 9/5) + 32
- °F to °C: °C = (°F − 32) × 5/9
Use kelvin without a degree symbol. Temperature differences are handled differently from temperature readings: a change of 1 °C has the same size as a change of 1 K.
Dimensional-analysis workflow
- Write the starting value with its unit.
- Choose a conversion factor that contains the starting unit on the opposite side, so it can cancel.
- Multiply, cancel units, and repeat if more than one conversion is needed.
- Round only at the end, using appropriate significant figures.
- Check the direction and approximate size of the answer.
For example, to convert 2.5 m2 to cm2:
2.5 m2 × (100 cm / 1 m)2 = 25,000 cm2.
The exponent applies to both the number and the unit. This is why multiplying by 100 only once would produce an incorrect area conversion.
What to double-check
- Prefix case: Distinguish m (milli), M (mega), k (kilo), and K (kelvin).
- Unit type: Confirm whether the problem involves length, area, volume, speed, pressure, energy, or another dimension.
- Squared and cubed units: Apply the exponent to the full conversion factor.
- Temperature offsets: Use an equation, not a single multiplying factor, when converting temperature scales.
- Mass versus force: Kilograms measure mass; newtons measure force.
- Regional conventions: Identify US versus imperial gallons, short versus long tons, and other system-specific units.
- Precision: Keep guard digits during the calculation, then round the final result to match the input data.
- Notation: Use a leading zero for values below one, such as 0.25 m, and avoid ambiguous unit abbreviations.
For a related review of rounding and scientific notation, see Scientific Notation and Significant Figures. A calculator can perform arithmetic, but it cannot detect a unit placed in the wrong position in a conversion factor.
Common mistakes
Moving a decimal without identifying the units: Decimal movement is a useful shortcut only after the prefix relationship is known. Write the conversion factor when the units are unfamiliar.
Using 100 instead of 10,000 for square meters to square centimeters: Area conversions require the factor to be squared. The same principle applies to cubic measurements.
Adding 273.15 in the wrong direction: Celsius to kelvin requires addition; kelvin to Celsius requires subtraction.
Confusing density with concentration: Density commonly has units such as kg/m3, while concentration may be expressed as mg/L or mol/L. Their dimensions and interpretations are not interchangeable.
Rounding each intermediate step: Early rounding can create a noticeable difference in multi-step calculations. Retain extra digits until the final line.
Reporting a bare number: A result without units is incomplete. Include the unit and, when useful, the conversion path that produced it.
When to revisit
Keep this reference available before a new laboratory course, field season, engineering project, or earth-science data review. Recheck the conventions whenever a worksheet, instrument, software package, or data source switches measurement systems. This is especially important for imported datasets, where pressure, temperature, distance, and concentration units may not match the units used in your calculation.
Before submitting or using a result, run this final checklist:
- Have I written the starting unit and the desired final unit?
- Do all conversion factors cancel correctly?
- Did I square or cube factors where necessary?
- Did I use the correct temperature equation and unit convention?
- Is the magnitude physically reasonable?
- Are the final significant figures and units clearly reported?
When a conversion supports an environmental or space-science interpretation, preserve the original value and unit alongside the converted result. That small habit makes later checks easier and helps prevent a correct calculation from being separated from the context that gives it meaning.